|
TPS 1500The affordable Hot Disk TPS 1500 is the ideal thermal conductivity meter for testing building materials, insulation materials or any other type of large bulk samples. The TPS 1500 shares the sterling quality, robustness and operative simplicity of the benchmark TPS 2500 S and meets ISO Standard 22007-2.
|
For heavy-duty testing
Sensors: The TPS 1500 operates a selection of Hot Disk sensors suitable for different materials and applications.
Temperature Control: Automatic Temperature series measurements (Isothermal Steps) are easy to perform using either an optional external Furnace or a temperature-controlled Circulating Bath. The Hot Disk Analysis software and TPS 1500 instrument controls the external device using RS-232 protocol.
Everything to get you started: The basic TPS 1500 setup includes everything you need to begin making measurements. The instrumentation includes: Software with standard isotropic module, one Sensor, Stainless Steel verification samples and a Room-Temperature Sample Holder.
Optional Software Modules: In addition to the standard ISOTROPIC and ONE-DIMENSIONAL modules, optional ones for ANISOTROPIC, SPECIFIC HEAT CAPACITY, and LOW-DENSITY, HIGHLY-INSULATING SAMPLES are available.
Sensors: The TPS 1500 operates a selection of Hot Disk sensors suitable for different materials and applications.
Temperature Control: Automatic Temperature series measurements (Isothermal Steps) are easy to perform using either an optional external Furnace or a temperature-controlled Circulating Bath. The Hot Disk Analysis software and TPS 1500 instrument controls the external device using RS-232 protocol.
Everything to get you started: The basic TPS 1500 setup includes everything you need to begin making measurements. The instrumentation includes: Software with standard isotropic module, one Sensor, Stainless Steel verification samples and a Room-Temperature Sample Holder.
Optional Software Modules: In addition to the standard ISOTROPIC and ONE-DIMENSIONAL modules, optional ones for ANISOTROPIC, SPECIFIC HEAT CAPACITY, and LOW-DENSITY, HIGHLY-INSULATING SAMPLES are available.
Thermal Conductivity |
0.01 to 400 W/m/K. |
Thermal Diffusivity |
0.01 to 100 mm²/s. |
Specific Heat Capacity |
Up to 5 MJ/m³K. |
Measurement Time |
20 to 5120 seconds. |
Reproducibility |
Typically better than 1 %. |
Accuracy |
Better than 5 %. |
Temperature Range Core Instrument With Furnace With Circulator |
-50 °C to 750 °C. Ambient Up to 750 °C -35 °C to 200 °C. |
Power Requirements |
Adjusted to the line voltage in the country of use. |
Smallest Sample Dimensions |
3 mm × 13 mm diameter or square for bulk testing. 20 mm × 7 mm diameter or square for one-dimensional testing. |
Sensor Types Available |
Kapton sensors: 5465, 5501, 8563, 4922, 5599. Mica sensors: 5465, 5082, 4921, 4922, 5599. Teflon sensors: 5465, 5501 |
Meets ISO Standard 22007-2.